• Incessant evolution and
    Incessant evolution and material quality to guarantee performance
  • Flexibility and suitability
    Flexibility and suitability these are our driveshafts best features
  • Combined safety devices
    Combined safety devices to reduce the cost of storage and repair
  • a wide range of profiles
    a wide range of profiles for telescopic tubes...to make the difference

EUROCARDAN SERIES

Standard driveshaft range includes different product ranges, which, in turn, cover a wide range of applications and needs for all those agricultural machines requiring power transmission.
The AX series and the series with homokinetic joints ME, UE and XE, are suitable for more heavy duty applications; the MX series is normally used for coupling between two transmissions shafts in sequence (transmissions with three cardan joints); series BX is recommended for shafts subject to a high level of vibrations or for those shafts which, at equal length, require more extension potential.

  • Filters
  Name Description
ax
AX

AX series is made up of a system of telescopic tubes with triangular profile with forks’ pin locking system. It can be used for any application.

BX
BX

The particular profile, characterized by a system of coupling broached tube- spline shaft, determines a high number of contact surfaces, thus rendering the transmission particularly suitable for those applications which need a frequent and precise tube sliding.

MX
MX

They are suitable for tractors provided with female hitch. They are characterized by pin locked pipes on machine side and splined hub on tractor side.

TX
TX

Suitable for lighter applications, they are made up of forks welded on triangular tubes, while maintaining the mechanical and durability  characteristics.

ue
UE

They make up the range of wide-angle transmissions, characterized by the presence of a  homokinetic  joint on machine side (UE). The homokinetic joint makes it possible to work through angles of transmission up to 80°.

XE
XE

If you need to maximize the work angles it is possible to place the homokinetic joint on both sides.

Serie ME
ME

They make up the range of wide-angle transmissions, characterized by the presence of a homokinetic joint on tractor side (ME) or on equipment side (UE).
The homokinetic joint makes it possibile to work through angles of transmission up to 80°.